材质:UL合格之南亚PVC(灰色),防火等级美规94V-0及欧规M1,PVC耐温85℃
构造:由槽底及槽盖两部份组成,槽底两侧设有出线孔。
特点:1.配线槽底座两侧出线孔互相对齐,锯断后可接成任意角度,能保持盘面美观、整
齐。
2.槽盖经特殊设计,与配线槽底座组合后不易脱落,且接合面平滑,不割伤手
及电线。
3.UL测试温度50℃。
绝缘配线槽盖可更换为含胶型防滑配线槽盖;更换后能有效增加涩度及黏度,使线槽底座与上盖密
合,以增加盖子的紧固程度。
型号变更:AD-1X2+AQ-1X2、HD-1X2+HQ-1X2、SD-1X2→SQ-1X2
Material: UL qualified South Asia PVC (gray), fire rating 94V-0 and M1, PVC temperature resistance 85°C
Structure: It is composed of two parts: the bottom of the tank and the cover of the tank, and there are outlet holes on both sides of the bottom of the tank.
Features: 1. The outlet holes on both sides of the wiring duct base are aligned with each other, and can be connected to any angle after sawing, which can keep the disk surface beautiful and neat
Even.
2. The groove cover is specially designed, which is not easy to fall off after combining with the base of the wiring duct, and the joint surface is smooth and does not cut the hand
and wires.
3. UL test temperature 50°C.
The insulated wiring duct cover can be replaced with a glue-containing anti-slip wiring duct cover; After replacement, it can effectively increase the astringency and viscosity, so that the base of the trunking and the upper cover are dense
to increase the tightness of the lid.
Model change: AD-1X2+AQ-1X2, HD-1X2+HQ-1X2, SD-1X2→SQ-1X2
材质:UL合格之南亚PVC(灰色),防火等级美规94V-0及欧规M1,PVC耐温85℃
构造:由槽底及槽盖两部份组成,槽底两侧设有出线孔。
特点:1.配线槽底座两侧出线孔互相对齐,锯断后可接成任意角度,能保持盘面美观、整
齐。
2.槽盖经特殊设计,与配线槽底座组合后不易脱落,且接合面平滑,不割伤手
及电线。
3.UL测试温度50℃。
绝缘配线槽盖可更换为含胶型防滑配线槽盖;更换后能有效增加涩度及黏度,使线槽底座与上盖密
合,以增加盖子的紧固程度。
型号变更:AD-1X2+AQ-1X2、HD-1X2+HQ-1X2、SD-1X2→SQ-1X2
Material: UL qualified South Asia PVC (gray), fire rating 94V-0 and M1, PVC temperature resistance 85°C
Structure: It is composed of two parts: the bottom of the tank and the cover of the tank, and there are outlet holes on both sides of the bottom of the tank.
Features: 1. The outlet holes on both sides of the wiring duct base are aligned with each other, and can be connected to any angle after sawing, which can keep the disk surface beautiful and neat
Even.
2. The groove cover is specially designed, which is not easy to fall off after combining with the base of the wiring duct, and the joint surface is smooth and does not cut the hand
and wires.
3. UL test temperature 50°C.
The insulated wiring duct cover can be replaced with a glue-containing anti-slip wiring duct cover; After replacement, it can effectively increase the astringency and viscosity, so that the base of the trunking and the upper cover are dense
to increase the tightness of the lid.
Model change: AD-1X2+AQ-1X2, HD-1X2+HQ-1X2, SD-1X2→SQ-1X2
服务与支持
—————
技术优势
————
问题反馈
————
关于凯盛
————
产品中心
————
Copyright (c)2022-06-16 东莞市凯盛配线器材有限公司 粤ICP备2022073163号-1 Rights Reserved