材质:UL合格之南亚PVC(灰色)，防火等级美规94V-0及欧规M1，PVC耐温85C.

构造:由槽底及槽盖两部份组成，槽底两侧设有出线孔，及一条刀割折痕。

特点:1.两侧出线孔之凸点设计，可在同一出线孔做分层区隔使用。

2.槽底两侧均设有刀割折痕，可依安装者需求，免工具即可折出需要的侧孔大小。

3.配线槽底座两侧出线孔互相对齐，锯断后可接成任意角度，能保持盘面美观、整

齐。

4.槽盖经特殊设计，与配线槽底座组合后不易脱落，且接合面平滑，不割伤手及电

线。

5.UL测试温度50C。

绝缘配线槽盖可更换为含胶型防滑配线槽盖;更换后能有效增加涩度及黏度，使线槽底座与上盖密

合，以增加盖子的紧固程度。

型号变更:GD-3060+G0-3060

Material: UL qualified South Asia PVC (gray), fire rating 94V-0 and M1, PVC temperature resistance 85C.

Structure: It is composed of two parts: the bottom of the groove and the cover of the groove, and there are outlet holes on both sides of the bottom of the groove and a knife cutting crease.

Features: 1. The convex design of the outlet holes on both sides can be used for layered separation in the same outlet hole.

2. There are knife cutting creases on both sides of the bottom of the groove, and the required side hole size can be folded out without tools according to the needs of the installer.

3. The outlet holes on both sides of the base of the wiring duct are aligned with each other, and can be connected to any angle after sawing, which can keep the disk surface beautiful and neat

Even.

4. The groove cover is specially designed, which is not easy to fall off after being combined with the base of the wiring groove, and the joint surface is smooth, so as not to cut hands and electricity

Line.

5.UL test temperature 50C.

The insulated wiring duct cover can be replaced with a glue-containing anti-slip wiring duct cover; After replacement, it can effectively increase the astringency and viscosity, so that the base of the trunking and the upper cover are dense

to increase the tightness of the lid.

Model change: GD-3060+G0-3060